Screening Selection of Hydrogen Evolution-Inhibiting and Zincphilic Alloy Anode for Aqueous Zn Battery.

The hydrogen evolution reaction (HER) and Zn dendrites growth are two entangled detrimental effects hindering the application of aqueous Zn batteries. The alloying strategy is studied to be a convenient avenue to stabilize Zn anodes, but there still lacks global understanding when selecting reliable alloy elements. Herein, it is proposed to evaluate the Zn alloying elements in a holistic way by considering their effects on HER, zincphilicity, price, and environmental-friendliness. Screening selection sequence is established through the theoretical evaluation of 17 common alloying elements according to their effects on hydrogen evolution and Zn nucleation thermodynamics. Two alloy electrodes with opposite predicted effects are prepared for experimental demonstration, i.e., HER-inhibiting Bi and HER-exacerbating Ni. Impressively, the optimum ZnBi alloy anode exhibits one order of magnitude lower hydrogen evolution rate than that of the pure Zn, leading to an ultra-long plating/stripping cycling life for more than 11 000 cycles at a high current density of 20 mA cm-2 and 81% capacity retention for 170 cycles in a Zn-V2O5 pouch cell. The study not only proposes a holistic alloy selection principle for Zn anode but also identifies a practically effective alloy element.

Dual-plasmonic Au@Cu7S4 yolk@shell nanocrystals for photocatalytic hydrogen production across visible to near infrared spectral region.

Near infrared energy remains untapped toward the maneuvering of entire solar spectrum harvesting for fulfilling the nuts and bolts of solar hydrogen production. We report the use of Au@Cu7S4 yolk@shell nanocrystals as dual-plasmonic photocatalysts to achieve remarkable hydrogen production under visible and near infrared illumination. Ultrafast spectroscopic data reveal the prevalence of long-lived charge separation states for Au@Cu7S4 under both visible and near infrared excitation. Combined with the advantageous features of yolk@shell nanostructures, Au@Cu7S4 achieves a peak quantum yield of 9.4% at 500 nm and a record-breaking quantum yield of 7.3% at 2200 nm for hydrogen production in the absence of additional co-catalysts. The design of a sustainable visible- and near infrared-responsive photocatalytic system is expected to inspire further widespread applications in solar fuel generation. In this work, the feasibility of exploiting the localized surface plasmon resonance property of self-doped, nonstoichiometric semiconductor nanocrystals for the realization of wide-spectrum-driven photocatalysis is highlighted.

Direct Observation of Vacancy-Cluster-Mediated Hydride Nucleation and the Anomalous Precipitation Memory Effect in Zirconium.

Controlling the heterogeneous nucleation of new phases is of importance in tuning the microstructures and properties of materials. However, the role of vacancy-a popular defect in materials that is hard to be resolved under conventional electron microscopy-in the heterogeneous phase nucleation remains intriguing. Here, this work captures direct in situ experimental evidences that vacancy clusters promote the heterogeneous hydride nucleation and cause the anomalous precipitation memory effect in zirconium. Both interstitial and vacancy dislocation loops form after hydride dissolution. Interestingly, hydride reprecipitation only occurs on those vacancy loop decorated sites during cooling. Atomistic simulations reveal that hydrogen atoms are preferentially segregated at individual vacancy and vacancy clusters, which assist hydride nucleation, and stimulate the unusual memory effect during hydride reprecipitation. The finding breaks the traditional view on the sequence of heterogeneous nucleation sites and sheds light on the solid phase transformation related to vacancy-sensitive alloying elements.

Spin Polarization of Mn Could Enhance Grain Boundary Sliding in Mg.

Segregation of rare earth alloying elements are known to segregate to grain boundaries in Mg and suppress grain boundary sliding via strong chemical bonds. Segregation of Mn, however, has recently been found to enhance grain boundary sliding in Mg, thereby boosting its ductility. Taking the Mg (2¯114) twin boundary as an example, we performed a first-principles comparative study on the segregation and chemical bonding of Y, Zn, and Mn at this boundary. We found that both Y-4d and Mn-3d states hybridized with the Mg-3sp states, while Zn-Mg bonding was characterized by charge transfer only. Strong spin-polarization of Mn pushed the up-spin 3d states down, leading to less anisotropic Mn-Mg bonds with more delocalized charge distribution at the twin boundary, and thus promotes grain boundary plasticity, e.g., grain boundary sliding.

Dislocation-Mediated Hydride Precipitation in Zirconium.

The formation of hydrides challenges the integrity of zirconium (Zr) fuel cladding in nuclear reactors. The dynamics of hydride precipitation are complex. Especially, the formation of the butterfly or bird-nest configurations of dislocation structures around hydride is rather intriguing. By in-situ transmission electron microscopy experiments and density functional theory simulations, it is discovered that hydride growth is a hybrid displacive-diffusive process, which is regulated by intermittent dislocation emissions. A strong tensile stress field around the hydride tip increases the solubility of hydrogen in Zr matrix, which prevents hydride growth. Punching-out dislocations reduces the tensile stress surrounding the hydride, decreases hydrogen solubility, reboots the hydride precipitation and accelerates the growth of the hydride. The emission of dislocations mediates hydride growth, and finally, the consecutively emitted dislocations evolve into a butterfly or bird-nest configuration around the hydride.

Atomistic processes of surface-diffusion-induced abnormal softening in nanoscale metallic crystals.

Ultrahigh surface-to-volume ratio in nanoscale materials, could dramatically facilitate mass transport, leading to surface-mediated diffusion similar to Coble-type creep in polycrystalline materials. Unfortunately, the Coble creep is just a conceptual model, and the associated physical mechanisms of mass transport have never been revealed at atomic scale. Akin to the ambiguities in Coble creep, atomic surface diffusion in nanoscale crystals remains largely unclear, especially when mediating yielding and plastic flow. Here, by using in situ nanomechanical testing under high-resolution transmission electron microscope, we find that the diffusion-assisted dislocation nucleation induces the transition from a normal to an inverse Hall-Petch-like relation of the strength-size dependence and the surface-creep leads to the abnormal softening in flow stress with the reduction in size of nanoscale silver, contrary to the classical "alternating dislocation starvation" behavior in nanoscale platinum. This work provides insights into the atomic-scale mechanisms of diffusion-mediated deformation in nanoscale materials, and impact on the design for ultrasmall-sized nanomechanical devices.

Database-driven semigrand canonical Monte Carlo method: Application to segregation isotherm on defects in alloys.

The application of existing semigrand canonical ensemble Monte Carlo algorithms to alloys requires the chemical potential difference values between pairs of atomic species in the alloys as inputs. However, finding the appropriate values for a target system at a desired temperature and bulk composition is a time-consuming task consisting of multiple test runs to determine the chemical potential differences. This problem becomes more serious when dealing with systems containing three or more atomic species, such as medium- and high-entropy alloys, due to the increase of the number of chemical potential differences that need to be calculated. Here we propose a method for sampling from the semigrand canonical ensemble that relies on energy databases acting as an external atomic reservoir at the desired temperature and composition. Given these energy databases, the desired bulk composition and corresponding chemical potential differences can be satisfied in a "single" Monte Carlo simulation. Moreover, the energy databases shed light on the underlying energetics of alloys, reflecting their local chemical ordering. We demonstrate the validity of this method using analyses of segregation isotherms at grain boundaries and dislocations in two alloy systems: Fe-1-at.-%-Si and NiCoCr medium-entropy alloy. We also discuss the possibly relevant information contained in such energy databases.

Competing nucleation of single- and double-layer Guinier-Preston zones in Al-Cu alloys.

Solid-state precipitation is a key heat-treatment strategy for strengthening engineering alloys. Therefore, predicting the precipitation process of localized solute-rich clusters, such as Guinier-Preston (GP) zones, is necessary. We quantitatively evaluated the critical nucleus size and nucleation barrier of GP zones in Al-Cu alloys, illustrating the precipitation preferences of single-layer (GP1) and double-layer (GP2) GP zones. Based on classical nucleation theory using an effective multi-body potential for dilute Al-Cu systems, our model predicted GP1 and GP2 precipitation sequences at various temperatures and Cu concentrations in a manner consistent with experimental observations. The crossover between formation enthalpy curves of GP1 and GP2 with increasing cluster size determines the critical conditions under which GP2 zones can nucleate without prior formation of GP1 zones. This relationship reflects competing interactions within and between clusters. The results illustrate the underlying mechanisms of competing nucleation between zones, and provide guidance for tailoring aging conditions to achieve desired mechanical properties for specific applications.

Hydrogen-Enhanced Vacancy Diffusion in Metals.

Vacancy diffusion is fundamental to materials science. Hydrogen atoms bind strongly to vacancies and are often believed to retard vacancy diffusion. Here, we use a potential-of-mean-force method to study the diffusion of vacancies in Cu and Pd. We find H atoms, instead of dragging, enhance the diffusivity of vacancies due to a positive hydrogen Gibbs excess at the saddle-point: that is, the migration saddle attracts more H than the vacancy ground state, characterized by an activation excess ΓHm ≈ 1 H, together with also-positive migration activation volume Ωm and activation entropy Sm. Thus, according to the Gibbs adsorption isotherm generalized to the activation path, a higher µH significantly lowers the migration free-energy barrier. This is verified by ab initio grand canonical Monte Carlo simulations and direct molecular dynamics simulations. This trend is believed to be generic for migrating dislocations, grain boundaries, and so on that also have a higher capacity for attracting H atoms due to a positive activation volume at the migration saddles.

Unique universal scaling in nanoindentation pop-ins.

Power laws are omnipresent and actively studied in many scientific fields, including plasticity of materials. Here, we report the power-law statistics in the second and subsequent pop-in magnitudes during load-controlled nanoindentation testing, whereas the first pop-in is characterized by Gaussian-like statistics with a well-defined average value. The transition from Gaussian-like to power-law is due to the change in the deformation mechanism from dislocation nucleation to dislocation network evolution in the sharp-indenter induced abruptly decaying stress and dislocation density fields. Based on nanoindentation testing on the (100) and (111) surfaces of body-centered cubic (BCC) iron and the (100) surface of face-centered cubic (FCC) copper, the scaling exponents of the power laws were determined to be 5.6, 3.9, and 6.4, respectively. These power-law exponents are much higher than those typically observed in micro-pillar plasticity (1.0-1.8), suggesting that the nanoindentation plasticity belongs to a different universality class than the micro-pillar plasticity.

Reduction of dislocation, mean free path, and migration barriers using high entropy alloy: insights from the atomistic study of irradiation damage of CoNiCrFeMn.

High entropy alloy has attracted extensive attention in nuclear energy due to outstanding irradiation resistance, partially due to sluggish diffusion. The mechanism from a defect-generation perspective, however, has received much less attention. In this paper, the formation of dislocation loops, and migration of interstitials and vacancies in CoNiCrFeMn high entropy alloy under consecutive bombardments were studied by molecular dynamics simulations. Compared to pure Ni, less defects were produced in the CoNiCrFeMn. Only a few small dislocation loops were observed, and the length of dislocation was small. The dislocation loops in Ni matrix were obviously longer and so was the length of dislocation. The interstitial clusters had much smaller mean free path during migration in the CoNiCrFeMn. The mean free path of 10-interstitial clusters in CoNiCrFeMn was reduced over 40 times compared to that in pure Ni. In addition, CoNiCrFeMn had a smaller difference of migration energy between interstitial and vacancy, which increased the opportunity of recombination of defects, therefore, led to less defects and much fewer dislocation loops. Our results provide insights into the mechanism of irradiation resistance in the high entropy alloy and could be useful in material design for irradiation tolerance and accident tolerance materials in nuclear energy.

Structural relaxation affecting shear-transformation avalanches in metallic glasses.

Avalanche behaviors, characterized by power-law statistics and structural relaxation that induces shear localization in amorphous plasticity, play an essential role in deciding the mechanical properties of amorphous metallic solids (i.e., metallic glasses). However, their interdependence is still not fully understood. To investigate the influence of structural relaxation on elementary avalanche behavior, we perform molecular-dynamics simulations for the shear deformation test of metallic glasses using two typical metallic-glass models comprising a less-relaxed (as-quenched) glass and a well-relaxed (well-aged) glass exhibiting a relatively homogeneous deformation and a shear-band-like heterogeneous deformation, respectively. The data on elementary avalanches obtained from both glass models follow the same power-law statistics with different maximum event sizes, and the well-relaxed glass shows shear localization. Evaluating the spatial correlation functions of the nonaffine squared displacements of atoms during each elementary avalanche event, we observe that the shapes of the elementary avalanche regions in the well-relaxed glasses tend to be anisotropic, whereas those in the less-relaxed glasses are relatively isotropic. Furthermore, we demonstrate that a temporal clustering in the direction of the avalanche propagation emerges, and a considerable correlation between the anisotropy and avalanche size exists in the well-relaxed glass model.

Controlled growth of single-crystalline metal nanowires via thermomigration across a nanoscale junction.

Mass transport driven by temperature gradient is commonly seen in fluids. However, here we demonstrate that when drawing a cold nano-tip off a hot solid substrate, thermomigration can be so rampant that it can be exploited for producing single-crystalline aluminum, copper, silver and tin nanowires. This demonstrates that in nanoscale objects, solids can mimic liquids in rapid morphological changes, by virtue of fast surface diffusion across short distances. During uniform growth, a thin neck-shaped ligament containing a grain boundary (GB) usually forms between the hot and the cold ends, sustaining an extremely high temperature gradient that should have driven even larger mass flux, if not counteracted by the relative sluggishness of plating into the GB and the resulting back stress. This GB-containing ligament is quite robust and can adapt to varying drawing directions and velocities, imparting good controllability to the nanowire growth in a manner akin to Czochralski crystal growth.

Oxyhydroxide of metallic nanowires in a molecular H2O and H2O2 environment and their effects on mechanical properties.

To avoid unexpected environmental mechanical failure, there is a strong need to fully understand the details of the oxidation process and intrinsic mechanical properties of reactive metallic iron (Fe) nanowires (NWs) under various aqueous reactive environmental conditions. Herein, we employed ReaxFF reactive molecular dynamics (MD) simulations to elucidate the oxidation of Fe NWs exposed to molecular water (H2O) and hydrogen peroxide (H2O2) environment, and the influence of the oxide shell layer on the tensile mechanical deformation properties of Fe NWs. Our structural analysis shows that oxidation of Fe NWs occurs with the formation of different iron oxide and hydroxide phases in the aqueous molecular H2O and H2O2 oxidizing environments. We observe that the resulting microstructure due to pre-oxide shell layer formation reduces the mechanical stress via increasing the initial defect sites in the vicinity of the oxide region to facilitate the onset of plastic deformation during tensile loading. Specifically, the oxide layer of Fe NWs formed in the H2O2 environment has a relatively significant effect on the deterioration of the mechanical properties of Fe NWs. The weakening of the yield stress and Young modulus of H2O2 oxidized Fe NWs indicates the important role of local oxide microstructures on mechanical deformation properties of individual Fe NWs. Notably, deformation twinning is found as the primary mechanical plastic deformation mechanism of all Fe NWs, but it is initially observed at low strain and stress level for the oxidized Fe NWs.

Predictive modeling of Time-Temperature-Transformation diagram of metallic glasses based on atomistically-informed classical nucleation theory.

Theoretical prediction of glass forming ability (GFA) of metallic alloys is a key process in exploring metallic alloy compositions with excellent GFA and thus with the ability to form a large-sized bulk metallic glass. Molecular dynamics (MD) simulation is a promising tool to achieve a theoretical prediction. However, direct MD prediction continues to be challenging due to the time-scale limitation of MD. With respect to practical bulk metallic glass alloys, the time necessary for quenching at a typical cooling rate is five or more orders of magnitude higher than that at the MD time-scale. To overcome the time-scale issue, this study proposes a combined method of classical nucleation theory and MD simulations. The method actually allows to depict the time-temperature-transformation (TTT) diagram of the bulk metallic glass alloys. The TTT directly provides a prediction of the critical cooling rate and GFA. Although the method assumes conventional classical nucleation theory, all the material parameters appearing in the theory were determined by MD simulations using realistic interatomic potentials. The method is used to compute the TTT diagrams and critical cooling rates of two Cu-Zr alloy compositions (Cu50Zr50 and Cu20Zr80). The results indicate that the proposed method reasonably predicts the critical cooling rate based on the computed TTT.

Thermal rejuvenation in metallic glasses.

Structural rejuvenation in metallic glasses by a thermal process (i.e. through recovery annealing) was investigated experimentally and theoretically for various alloy compositions. An increase in the potential energy, a decrease in the density, and a change in the local structure as well as mechanical softening were observed after thermal rejuvenation. Two parameters, one related to the annealing temperature, Ta/Tg, and the other related to the cooling rate during the recovery annealing process, Vc/Vi, were proposed to evaluate the rejuvenation phenomena. A rejuvenation map was constructed using these two parameters. Since the thermal history of metallic glasses is reset above 1.2Tg, accompanied by a change in the local structure, it is essential that the condition of Ta/Tg ≥ 1.2 is satisfied during annealing. The glassy structure transforms into a more disordered state with the decomposition of icosahedral short-range order within this temperature range. Therefore, a new glassy structure (rejuvenation) depending on the subsequent quenching rate is generated. Partial rejuvenation also occurs in a Zr55Al10Ni5Cu30 bulk metallic glass when annealing is performed at a low temperature (Ta/Tg ~ 1.07) followed by rapid cooling. This behavior probably originates from disordering in the weakly bonded (loosely packed) region. This study provides a novel approach to improving the mechanical properties of metallic glasses by controlling their glassy structure.

Radiation-Induced Helium Nanobubbles Enhance Ductility in Submicron-Sized Single-Crystalline Copper.

The workability and ductility of metals usually degrade with exposure to irradiation, hence the phrase "radiation damage". Here, we found that helium (He) radiation can actually enhance the room-temperature deformability of submicron-sized copper. In particular, Cu single crystals with diameter of 100-300 nm and containing numerous pressurized sub-10 nm He bubbles become stronger, more stable in plastic flow and ductile in tension, compared to fully dense samples of the same dimensions that tend to display plastic instability (strain bursts). The sub-10 nm He bubbles are seen to be dislocation sources as well as shearable obstacles, which promote dislocation storage and reduce dislocation mean free path, thus contributing to more homogeneous and stable plasticity. Failure happens abruptly only after significant bubble coalescence. The current findings can be explained in light of Weibull statistics of failure and the beneficial effects of bubbles on plasticity. These results shed light on plasticity and damage developments in metals and could open new avenues for making mechanically robust nano- and microstructures by ion beam processing and He bubble engineering.

Controlled rejuvenation of amorphous metals with thermal processing.

Rejuvenation is the configurational excitation of amorphous materials and is one of the more promising approaches for improving the deformability of amorphous metals that usually exhibit macroscopic brittle fracture modes. Here, we propose a method to control the level of rejuvenation through systematic thermal processing and clarify the crucial feasibility conditions by means of molecular dynamics simulations of annealing and quenching. We also experimentally demonstrate rejuvenation level control in Zr(55)Al(10)Ni(5)Cu(30) bulk metallic glass. Our local heat-treatment recipe (rising temperature above 1.1T(g), followed by a temperature quench rate exceeding the previous) opens avenue to modifying the glass properties after it has been cast and processed into near component shape, where a higher local cooling rate may be afforded by for example transient laser heating, adding spatial control and great flexibility to the processing.